Tag Archives: split ac service near me

There Are Some Initial Steps To Install Aire Acondicionado Tijuana

The first thing you should do is install the interior of the air conditioner. Make sure that during installation, the selected location is not obstructed by the inside of a wall to connect the internal AC unit. It is important to avoid direct sunlight and heat sources. In addition, it is also important to avoid the location of the oil mist or the location of the gas leak. If you want to avoid the risk of gas leaks, you can hire services full article.

For the indoor unit itself, it requires at least 15 centimeters of open space to surround the top and also the sides. As for the distance from the ground surface, there should be at least 2.13 meters. It is also necessary to install the unit within 1 meter of the antenna and also the cable to avoid operational interference in the air conditioning.

In addition, the wall must also be strong to support the weight of the air conditioner. Of course, it is necessary to build an iron or wooden frame to provide additional assistance. This is done to avoid the possibility of the AC being free of your connection.

Next, hold the mounting plate for dingding. To help with installation, you can use a water passage to make sure the frame is vertical and horizontal box-shaped. Be sure to drill the hole in the wall at the correct point to install the wall slab. Put the plastic anchor in the hole and then tighten the slab.

Next, drill a hole in the wall to match the pipe used. For this reason, it is necessary to find the best point for the outer hole based on the opening of the mounting box. Also consider the distance and length of pipe approximately needed to reach the unit outdoors.

Drill a hole about 7.5 centimeters in diameter in the wall. This hole must be sloping downward to the outside and ensures proper drainage. Also insert the edge of the pipe into the hole.

Zap Aire Acondicionado Tijuana
Avenida Industrial 30 Anexa 20 de Noviembre 22105 tijuana, BC